Level Quick CPQT Latex Primer/Sealer 1 Qt, White

Latex primer/sealer that prepares surfaces for the application of LevelQuik or LevelLite Self-Leveling Underlayments. It seals porous surfaces and improves the bond of underlayments.

Highlights:

• Size: 1 Quart
• Color: White
• Coverage: 75 sq. ft. to 150 sq. ft.
• Prepares surfaces for the application of self-leveling underlayment's.
• Seals porous surfaces and improves the bond of underlayment's.
• MoldGard technology resist mold and mildew growth.
• Drying time up to 2 hours.
• Soap and water clean up.

Suitable Tile Types:

• Vitreous, semi-vitreous or non-vitreous tile: ceramic, mosaic, quarry, cement body tile.
• Impervious porcelain and glass tile.
• Brick and stone veneer.
• Cement-based precast terrazzo.
• Natural stone tile.
• Stone, terrazzo.
• Carpet.
• Wood, parquet.
• Vinyl composition tile (VCT).
• Sheet vinyl flooring.
• Laminated flooring.

Suitable Substrates:

• Interior and exterior applications.
• Concrete.
• Masonry.
• Mortar beds.
• Lightweight concrete.
• Air entrained concrete.
• Primed gypsum self-leveling underlayment, minimum 2000 psi (13.8 MPa) cured.
• Post-tension concrete.
• Exterior Grade Plywood.
• Primed OSB.
• Exterior decks.
• Existing ceramic tile.
• Resilient flooring.
• Cutback adhesive.
• Radiant heating systems.

Limitations:

• Do not bond directly to hardwood, Luan plywood, particle board, parquet, cushion or sponge-back vinyl flooring, metal, fiberglass, plastic or OSB panels.
• Do not use as a wear surface.
• When setting glass tile larger than 6" x 6" (15 x 15 cm), contact Custom's® Technical Services for recommendations.
• When setting dimensional stone larger than 12" x 12" (30 x 30 cm), contact Custom's® Technical Services for recommendations regarding subfloor deflection requirements.

Environmental Consideration:

Custom Building Products is committed to environmental responsibility in both products produced and in manufacturing practices. Use of this product may contribute to LEED certification.

Application:

Apply with a paint brush, short nap roller or a soft push broom. Apply a thin, even coat and allow to dry to a clear film before applying LevelQuik or LevelLite SelfLeveling Underlayments.

Cleaning of Equipment:

Clean with water before the material dries.

Storage:

Store in a cool dry area. Keep from freezing.